OUR PRODUCTS

brewers-edge-website-phots.jpg

BREWER'S EDGE MASH & BOIL

-Mash  & Boil in the same unit 

-Simple and Easy to Use

-Plugs into any GFIC outlet

-Mash up to 16 pounds

-Double Wall Construction

-Available With or Without a Recirculation Pump

-Two Year Warranty

  

 

Do you want to get into mashing but want something simple? The patented Brewer’s Edge® Mash & Boil makes it easy. No need for an outdoor burner, complicated brewing stand, or a 220 volt special circuit - it plugs into any 110 volt GFI household outlet. The Mash and Boil’s exclusive double wall stainless construction conserves heat to achieve a rolling boil with only 110 volts and 1600 watts, and its precise thermostat and internal sparging basket lets you mash and boil in the same vessel. U.S. Patent D819,385

A typical brew day with the Mash & Boil begins with formulating your 5 gallon all grain recipe (up to 16 pounds of crushed grain can be mashed), and then heating your strike water to 162° F, the preset heat temperature. After 40 minutes or so, your strike water is 162° F, and you mix your crushed grain into the sparging basket already inside the Mash and Boil. The mash will cool to 152° or so, and then you set your thermostat to 150°, cover, and let mash for 1 hour. During this mash time you will need to separately heat 3 gallons of sparge water to 175° in a separate pot you provide. A thermometer hole is provided in the lid, in case you want to monitor the temperature of the top of the mash with any long probe analog or digital thermometer.
 
After one hour, lift the sparging bucket and lock on its included legs, and let the malt sugar drip into your Mash & Boil, which has now became a boiling pot. Turn the thermostat up to 218° F. and give it about 40 minutes to heat to a boil. During this time, ladle one gallon of hot sparge water at a time into the top of the sparging basket until you get to 5½ gallons. Now remove the grain basket, and when the boil begins, add your hops as per your recipe. Boil for 1 hour, and then cool with a suitable wort chiller (not included, our item E81 works well as does any immersion chiller that is up to 11" in diameter). Or use the stainless valve with ½” hose barb to run the wort through your external chiller.

The Mash & Boil features an adjustable thermostat (switchable from Fahrenheit to Centigrade) with an adjustable run time preset at 3½ hours for safety. It also features a delayed start timer, so you can program the Mash and Boil to turn on up to 24 hours after setting. For example, load it with strike water, and have it set to be hot when you come home from work to save time. Intended for 5 gallon batches, maximum capacity is 7½ gallons. 28” tall closed, 40” tall with basket, 14” wide. A 5' power cord is included.

brewers-edge-keg-lube-photo-front_edited_edited.jpg

BREWER'S EDGE KEG LUBE

A food grade waterproof grease with synthetic lubricants, ideal for lubricating rubber O rings or valves on any kegging system. Highly recommended for making ball and pin lock fittings easier to install and remove, and to improve O ring sealing. USDA H-1 rated, which means it is safe for all applications that have incidental food contact.  Safe for rubber, silicone, and plastic parts.

Brewers-edge-mash-rake-photo.jpg

HARDWOOD MASH RAKE

Designed by brewers several centuries ago, these traditional hardwood mash rakes are handcrafted in the United States from white birch. The angled rake design make blending strike water with crushed grain an easy task. Both rakes (30” rake shown) feature round hardwood components that help them flow through the stiffest mash with ease. Much easier to use than a long spoon, and a reminder that many of the best ideas are not new.